ŌMATA STOCKADE AUCTION
Monday, 26 August - Tuesday, 3 September 2024

0098

A Victorian blackened iron boot scraper with gold painted decoration. W.380mm
Estimate: $100 - $200

0099

An old coopered red painted pine Shaker style lidded bucket, handle absent. H.320mm.

0100

An old coopered pine, Shaker-style lidded bucket with swing handle. H.250mm.

0101

A pair of old wooden buckets, three metal rings to each bucket, one with carrying ring. Dia.302 and 340mm

0102

An 1822 pattern Officer's sword with brass scabbard, brass guard with folding langet, VR crowned cypher,
Estimate: $600 - $800

0103

An 1822 Pattern Officer's sword with japanned steel scabbard, brass guard with folding langet, VR crowned cypher,
Estimate: $700 - $900

0104

An 1822 Pattern Officer's sword with steel scabbard, brass guard with folding langet, VR crowned cypher,
Estimate: $450 - $600

0105

An 1822/45 Pattern Officer's sword with steel scabbard, brass guard with folding langet, VR crowned cypher,
Estimate: $500 - $700

0106

A Pattern 1822 Infantry Officer's sword and brass scabbard, with brass guard without folding langet, with VR crowned cypher,
Estimate: $450 - $600

0107

British P1856/58 Sword Bayonet with Leather Scabbard and Frog, Yataghan blade in excellent condition, leather grips good. The leather frog marked NZ broad arrow.
Estimate: $150 - $300

0108

Pattern 1856 & 1860 Snider Bayonet and Scabbard. As issued, blade and metal parts with stained aged appearance.
Estimate: $90 - $200

0109

British P.1856/58 Sword Bayonet. As issued with blade and metal parts with stained aged appearance. Sound black leather and steel scabbard.
Estimate: $100 - $200

0110

British P.1856/58 Sword Bayonet with leather scabbard, Yataghan blade with ‘WD’ and armoury markings at ricasso, number ‘0641’ on crossguard. Isolated pitting, good grips.
Estimate: $120 - $200

0111

British P.1856/58 Sword Bayonet. Good leather grips. Bar on barrel fitting. Cross guard numbered ‘01258’. Yataghan blade edge with some old file marks and a small amount of old pitting at the tip. Leather scabbard with old dent by chape and chape tip holed
Estimate: $100 - $200

0112

British P.1856/58 Sword Bayonet, Yataghan blade with Kirschbaum, Solingen logo, good knurled leather grips complete with steel scabbard with original finish.
Estimate: $120 - $200

0113

British P 1856/58 Sword Bayonet and Steel Scabbard, good leather grips. Yataghan blade in very good condition, Kirschbaum maker's logo and ‘WD’ armoury marks at ricasso, over stamped number ‘288’ at crossguard. Scabbard with surface rust.
Estimate: $120 - $200

0114

British P.1856/58 Sword Bayonet and Steel Scabbard, Yataghan blade with minor pitting and staining, over-stamped numbers at crossguard, armoury and ‘WD’ markings at ricasso. Good leather grips. The scabbard has overall browning with some pitting.
Estimate: $100 - $180

0115

British P.1856/58 Sword Bayonet. Good leather grips. Pommel missing press-stud. Yataghan blade. Steel scabbard with one dent and one screw missing.
Estimate: $100 - $180

0116

Volunteer Rifle Calibre .577, standard 1853 type pattern. 36" barrel marked ‘Turner's Patent' with very good bore. Barrel, lock and hammer well re-blued. Lock marked ‘Crown 1862’.
Estimate: $1,800 - $2,500

0117

Enfield muzzle loading three-band rifle .577 calibre. Lock marked ‘Tower 1856’ with crown over ‘VR’, 39" barrel,
Estimate: $1,500 - $2,200

0118

Enfield Pattern 1856 Carbine, lock marked ‘1857 Tower’, brass butt plate tang marked ‘NZ 594 71’, 24" barrel,
Estimate: $1,500 - $2,200

0119

Enfield pattern 1839 percussion musket. .75 caliber, converted from Brown Bess. Brass butt plate marked broad arrow 2/65 NZ. Lock plate marked 'Crown VR Tower'.
Estimate: $1,200 - $1,800

0120

Enfield Three-band .577 calibre Rifle with a 39" replacement Parker Hale barrel.
Estimate: $900 - $1,400

0121

Enfield Rifle musket three-band, Pattern 1853, 2nd model .577 cal., lock marked 'Tower 1856' with 'Crown' over 'VR', WD broad arrow stamp to stock, 39" barrel,
Estimate: $700 - $1,100

0122

Parker-Hale Replica Enfield caliber .577, muzzle loading percussion carbine. Good quality replica of 1861 model, as manufactured very little use.
Estimate: $500 - $900

0123

A two-band Sergeant's percussion muzzle loading carbine, barrel marked '..Henry Edinburgh', lock marked Jas Henry.
Estimate: $860 - $1,300

0124

Three old pulleys, includes two single pulley blocks and a double.

0125

A large old hand-forged steel shipwright's vice, length overall 1000mm.
Estimate: $100 - $200

0126

Two large wooden framed G-clamps along with a large wooden caliper clamp.

0127

Bark Spud Tool for debarking. Early 20thC. Tapered bladed end with socket fitting to long elm handle. L..1480mm

0128

Long handled colonial axe, L.1180mm. Heavilly rusted blade.

0129

A 19thC J.Beaty 2½" hand forged large mortise chisel, makers name to blade. Turned oak handle to the socket fitting. L.640mm
Estimate: $90 - $180

0130

A 19thC hand forged bark spud (bark remover) the steel blade with long socket fitting to the turned oak handle. L.810mm
Estimate: $80 - $160

0131

An early wooden fore or jack plane, deeply carved showing crucifix on top and wavy line on sides.

0132

A brass signaling lantern, with magnifying lens the body marked 'Bulpitt & Sons, 1905. Birmingham', including swing handle H.415mm.
Estimate: $150 - $300

0133

An ebonized tin late Victorian signal lamp with bull’s-eye lens

0134

A Williamson's patent brass miner’s Safety Lamp, c.1900. Tapered cylindrical form with iron hook to the domed vented top, gauze section above the glass-covered lamp. Damage to internal glass. H.230mm
Estimate: $90 - $180

0135

A Thomas & Williams brass miner's brass Safety Lamp c. 1900. The body being a long gauze section protected by three bars. H.235mm.
Estimate: $90 - $180

0136

A Victorian kerosene lamp with etched cranberry glass shade. The black china base and brass stand supporting a plain glass oil reservoir with two bands of cut decoration, H.540mmm
Estimate: $200 - $300

0137

A Miller's brass paraffin lamp, with a large heavily embossed brass oil reservoir, with glass chimney. H.560mm.
Estimate: $100 - $180

0138

A pair of 19thC Kempthorne Australian Railway lamps with zinc plated paraffin burners suspended beneath the white enamel and black painted covers, each labeled 'Kempthorne Pty. Ltd Melbourne Aust.' H.360mm.
Estimate: $300 - $500

0139

A copper and brass bugle.

0140

Two Victorian copper and brass powder flasks with graduated dispenser nozzles one of plain bag shape with nozzle to dispense 2 to 2¾ drams, the other decorated with basket weave, the nozzle marked Dixon & Sons, Made in England.
Estimate: $200 - $300

0141

Two Victorian copper powder flasks, with graduated dispenser nozzles one decorated with oak leaves and game the other with acanthus leaves.
Estimate: $200 - $300

0142

Two Victorian copper and brass powder flasks of bag shape with graduated dispenser nozzles one decorated with flutings beneath a foliate frieze at the shoulder, the other with a moulded anthemion design.
Estimate: $200 - $300

0143

Three Victorian gunpowder flasks, with decoratively moulded bag shaped bodies.
Estimate: $260 - $360

0144

A European cast iron gang mould to cast six lead balls, approx. 60 cal,
Estimate: $100 - $200

0145

A bronze bullet mould with steel capping cover, double cavity,
Estimate: $80 - $120

0146

A double long leather shot charger, in fine near original condition.
Estimate: $80 - $160

0147

Shot charger long for over shoulder by C.W Hawksley Sheffield . Complete with Irish spoon charger.
Estimate: $80 - $160

0148

A 19thC naval powder charge bucket red-brown painted canvas with coat-of-arms to one side. H.310mm. Handle broken.
Estimate: $150 - $300

0149

A 19thC naval powder charge bucket green painted canvas with coat-of-arms transfer to one side. H.310mm.
Estimate: $150 - $300

0150

A 19thC naval powder charge bucket painted canvas with coat-of-arms and other insignia. H.530mm. Handle broken.
Estimate: $150 - $300

0151

A 19thC naval powder charge bucket painted canvas with coat-of-arms to one side. H.420mm.
Estimate: $150 - $300

0152

An 1845 Pattern Navy Cutlass. 740mm long, single edged blade with spear point. Makers logo inside shield ‘Wilkinson, Pall Mall, London’.
Estimate: $500 - $700

0153

An 1845 Pattern Navy Cutlass. 685mm long, single edged blade with spear point, cleaned, shortened, WD marks and "C/88"
Estimate: $350 - $550

0154

An 1845 Pattern Navy Cutlass. 635mm long, single edged blade with spear point by Robert Mole. Black painted steel bowl with diamond shaped plaque affixed marked '10' and with '53' erased, grooved cast iron grips. Mole marked to blade back, WD marks, armoury marks and C/87 at ricasso,
Estimate: $350 - $550

0155

An 1845 Pattern Navy Cutlass. 730mm long, single edged blade with spear point, cleaned,
Estimate: $350 - $550

0156

An 1827 Pattern British Naval Officer's sword with brass scabbard, the hilt with lion head pommel,
Estimate: $600 - $900

0157

A British Drummers Pattern 1856 Sword. Clean 495mm straight double edged tapering blade, brass cruciform hilt with Victorian cypher. Stamped to side ‘9.96 RSF 13’ and matched ‘13’ to scabbard stud. Leather scabbard with brass locket and chape
Estimate: $260 - $400

0158

British Drummers’ Pattern 1856 Sword. 495mm slender double-edged spear point blade, brass cruciform hilt with Victorian cypher. Blade a brown patina with some pitting mainly on the point.
Estimate: $200 - $300

0159

British Mamaluke-stle Army Band sword, with cast brass grip, recurved crossguard with langets, pommel with foliate raised decoration, and ring for sword knot. 710mm curved, single edged blade with scattered light to moderate pitting.
Estimate: $400 - $650

0160

British 1853 Enfield Triangular Socket Bayonet, lightly cleaned.
Estimate: $80 - $140

0162

British 1853 Enfield Triangular Socket Bayonet needs cleaning.
Estimate: $80 - $140

0163

British 1853 Enfield Triangular Socket Bayonet (‘418’), lightly cleaned.
Estimate: $80 - $140

0164

British 1853 Enfield Triangular Socket Bayonet, lightly cleaned
Estimate: $80 - $140

0165

British 1853 Enfield Triangular Socket Bayonet, lightly cleaned. marked R & WA for makers’ Richard & William Aston.
Estimate: $80 - $140

0166

A scarce Enfield Pattern 1861 Rifled Cavalry Pattern Carbine, .577 caliber. A scarce carbine as practically all production was returned to Enfield before issue for conversion to Snider System.
Estimate: $1,600 - $2,200

0167

11 bore 1852 Pattern Sappers & Miners muzzle loading percussion smooth bore carbine. Lock marked ‘C H Oilks, Tower Hill, London’.
Estimate: $1,200 - $1,800

0168

Enfield Pattern 1856 Saddle Ring Carbine Musket. Lock marked 1858 Tower and Crown over VR, smooth bored for the Goldfield escorts in Otago.
Estimate: $400 - $550

0169

Reproduction copy of a Brown Bess flintlock, .75 cal rifle. 39" barrel. No maker’s marks or stamps to action or barrel,
Estimate: $700 - $1,000

0170

A Calisher & Terry Military Breech Loading Capping Carbine, caliber .30 bore. 20¼" barrel, 38" overall.
Estimate: $1,500 - $2,400

0171

A Flintlock Blunderbuss, circa 1820-1830, walnut stock with two wedges holding 14" barrel, makers mark ‘G&S Younge’ to lock,
Estimate: $900 - $1,300

0172

Enfield two-band Volunteer rifle 1856 pattern .577 caliber, makers mark ‘Tipping & Lawden’ to lock. Steel furniture, swivels, and cleaning rod. Pitting to barrel. NLR.
Estimate: $760 - $1,000

0173

Enfield Two-Band Rifle .577 Caliber, 33½" barrel with British proofs and ‘25’.
Estimate: $1,000 - $1,500

0174

British Service Pattern 1858 Percussion Naval Rifle, .577 calibre., two-band fitted 28¾" barrel,
Estimate: $760 - $1,000

0175

Hollis and Sheath single barrel fowling shotgun.12 gauge percussion. Attractive damascus twist pattern barrel. Wooden ramrod. Nice walnut stock with checquering to wrist and fore end. Barrel with London address line.
Estimate: $600 - $900

0176

Military Percussion Rifle, muzzle loading,the lock stamped 1845. With brass furniture, ramrod replaced. Barrel 30", polished, pitted. Provenance: Cordy's 21/06/2011 Lot 276. $630. NLR
Estimate: $300 - $500

0177

Eight vintage handsaws, mostly smaller, includes hacksaws, tenon, etc.
Estimate: $80 - $120

0178

Five old tenon saws, all with bar form backs; three brass, beech wood handles

0179

A 19thC mahogany infill Smoother Plane with steel body, brass keeper and screw.

0180

A Stanley Plane and a wooden 'D' router, the plane with a wooden bottom, the beech router of scrolling 'D' form with metal fittings.

0180A

Pair of wooden planes with copper underside " Twosome right and left" "craftsman made"

0181

Two Lock Mortice chisels, one named by the maker W. Marples & Sons, Sheffield, with beech handle, the other with elm handle. L.525 and 495mm.

0182

Three old wooden hand tools; oak spoke shave, beech spoke shave with brass fittings, and an oak handled router with steel sole and brass top plate fitting

0183

A wooden handled steel spoke shave, marked C E Jennings N.Y. 8

0184

Totally wooden brace. Removeable wooden chuck with fitted bit. Unique reverse screw threads.

0185

Nine vintage squares, includes Stanley, mostly rosewood handles, brass fitiings, steel blades

0186

Nine vintage squares, includes four Stanley, mostly rosewood handles, brass fitiings,steel blades

0187

A 19thC steel and mahogany Scottish brace and 22 various bits.

0188

A 19thC rosewood infill steel shoulder plane, previous owner's stamp to side 'Alex Penman'

0189

Set of three ebony and brass try squares, steel blade

0190

Hand forged blacksmiths frame saw. 1800's Lancashire pattern. Very fancy and very rare.

0191

A set of five Mortice chisels

0192

Sets of four and three steel calipers (7)

0193

A brass and steel 12 gauge shotgun cartridge reloading tool complete with swing out primer pocket cleaner +...,
Estimate: $100 - $300

0194

A Colt's Patent .36 caliber steel mould for round ball and conical bullet. Good condition.
Estimate: $150 - $300

0195

An Enfield Sergeant's wrench combination-tool, circa 1858, T-shaped with screw, wrench, pick and driver.
Estimate: $120 - $220

0196

A nipple key by Peter Dyson, Yorkshire, England, steel with brass end caps.

0197

A vintage stitched leather pistol holster and a travelling gun cleaning kit